This system contains ir receiver, IR transmitter and HDMI adapter by which you can extend the signal of your remote control through your house. In most cases, and you need to control the DVD from the display end, if one of the devices does not support the CEC function, then switch to the IR mode. Total 20ft, standard AV link protocol to perform remote control functions.
Enable the ir hdmi adapter for cec devices slide the switch from "IR" to "CEC", IR function or CEC function switchable, support RCMM. Power free. No power adapter necessary Uses power over HDMI Cable from HDMI source unit. It is a perfect solution for extending remote control ability to any room in the house, hidden Xbox One, AV receiver and the others.
Package contents: ir transmitter x1 ir receiver x1 hdmi adapter x2 User Manual x1 Infra red remote control command Extender: First please check your device to be sure you have a port labeled "IR". Supports ir frequency from 20 khz to 60 khz which covers nearly all the devices.
Inteset HDMI IR Extender for Connecting One A/V Device to a Display Over existing HDMI Cable
Description: this kit allows you to control any A/V device such as your cable box, A/V amp/receiver, etc. Supports nearly all a/v devices with IR 20 kHz to 60 kHz signal. Specifications: carrier frequency- broadband 20khz to 60khz, cable length of IR Receiver and Emitter: 5', Max Operating Current: 15mA, IR receiving distance: 30 feet, IR Adapter size: 1.
50"l x 083"w x 043"h. The higher the quality of your cable the longer the transmit distance. Most universal remotes including our INT422 Remote can be used with this set-up. Installation is simple. A popular use of the kit is when the device you want to control is in a different room or behind closed doors. A good quality hdmi cable will allow you to control your device from up to 75 feet or more.
PerryLee 30-60KHZ Dual-Band IR Remote Infrared Extender Emitter Receiver Hidden IR Repeater System Kit Transmitter Cable Kit Over HDMI Signal
Specifications: carrier frequency: dual band 30khz-60khz the receiving distance: 12m max operation current: 15mA Package list: 1x IR receiver 1x IR transmitter 2x HDMI Adapter Allows an a/v device with an existing newer HDMI Cable to be controlled by any IR Remote. Features & Specifications: Portable and flexible.
Based Support and Service. It can do control to the ir signal source device by using the received IR infrared signal by the IR Receiver. Ir extend distance is up to 25m it depends on the quality and length of the HDMI cable. You can do control to the ir signal source device by using the received IR infrared signal by the IR Receiver.
Plug and play, no driver installation needed. Power free; no power adapter Necessary Uses power over HDMI from HDMI source unit. Remote controller ir infra Red extender extends IR signal through HDMI cable to remote location.
Ensigear Remote Controlled HDMI 2.0 IR Adapter with Sony CEC ARC Function HDMI and HDCP Compliant
Can be used on hdmi cables, hdmi splitters, HDMI switches, and HDMI extenders. If both switches are set to the "cec" position, which hdmi cables do by default, the cable will pass CEC signals instead of IR signals, so the "CEC" position is in effect the "OFF" position. Ir function or CEC function switchable.
Power free, no power adapter necessary Uses power over HDMI from HDMI source unit. This hdmi feed-through ir adapter allow the use of an IR Transmitter and Receiver to send and receive signal over a standard HDMI cable. Note that to transmit the ir signal over the HDMI cable, the switches on both modules must be set to the "IR" position.
Power free; no power adapter Necessary Uses power over HDMI from HDMI source unit. If one switch is set to "cec" and the other to "IR", neither CEC nor IR signals will be passed, so ensure both switches are set the same. Supports nearly all a/v devices with IR 20 kHz to 60 kHz signal. Lifetime Warranty on all parts and labor.
Harmony IR Adapters, Ancable 2-Pack 2.5mm Mono Plug to 3.5mm Mono Jack Connector for Logitech Harmony Hub and IR Blaster, IR Emitter Extenders, IR Repeaters, IR Receivers
We care about only putting out high quality products that satisfy your needs. Caution, before you buy make sure you check the number of rings on the plug you are adapting. This allows for easy remote control of playback devices over extended distances. This hdmi feed-through ir adapter allow the use of an IR Transmitter and Receiver to send and receive signal over a standard HDMI cable.
Based Support and Service. It can do control to the ir signal source device by using the received IR infrared signal by the IR Receiver. Ir extend distance is up to 25m it depends on the quality and length of the HDMI cable. Ir function or CEC function switchable. Lifetime Warranty on all parts and labor. Fast u.
S.
Sewell Direct SW-29727-25 25-Feet Ir Infrared Extension Cable
Length: 25 ft. Connector type: 3. 5mm stereo Male/ 3. 5mm stereo Female. Known devices with issues: logitech Harmony hub, Verizon FIOS DVR ARRIS VMS1100 If your ir blaster is 3. 5mm like iphone or android aux port sizeand you want to use it on new logitech harmony hub, 2. 5 to 3. 5 adapter is the right choice for you.
Note: only compatible with devices with a 3. 5 mm ir port, some ir devices may use different connections. Supports nearly all a/v devices with IR 20 kHz to 60 kHz signal. One ring mono adapter, 2. 5 mm male to 3. 5 mm female adapter.