The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C.
Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Diameter: 1/2". The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. When heated in excess of 121 deg c 250 deg F, the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate.
Color: red, material: Polyethylene, Shrink Ratio: 3:1. Upon cooling, non-drying, forming a permanent, the adhesive solidifies, flexible and water resistant barrier.
TEMCo 1/2" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft BLACK
. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Diameter: 1/2". Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction.
1 year warranty. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.
.
TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED
Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. 1 year warranty. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 3/4". Color: red, material: Polyethylene, Shrink Ratio: 3:1.
Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Adhesive reflow will occur at temperatures above 80 deg C 176 deg F. Upon cooling, the adhesive solidifies, non-drying, forming a permanent, flexible and water resistant barrier. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive.
Diameter: 1/2".
TEMCo 3/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft BLACK
Temco industrial adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.
Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C.
Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Diameter: 1/2". Resistant to salt water, Oil, Diesel Fuel, Gasoline, and more. Diameter: 3/4". Adhesive reflow will occur at temperatures above 80 deg C 176 deg F.
TEMCo 3/8" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft BLACK
Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Color: black, material: Polyethylene, Shrink Ratio: 3:1. Upon cooling, the adhesive solidifies, non-drying, forming a permanent, flexible and water resistant barrier.
Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 3/4". 1 year warranty. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.
Adhesive reflow will occur at temperatures above 80 deg C 176 deg F.
TEMCo 1" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED
Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 3/8". Color: black, material: Polyethylene, Shrink Ratio: 3:1. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.
Color: red, material: Polyethylene, Shrink Ratio: 3:1. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.
Upon cooling, forming a permanent, the adhesive solidifies, non-drying, flexible and water resistant barrier. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 3/4".
SELTERM 10 Pack 2 Gauge 2 AWG 3/8 Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets
Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 1". Color: red, material: Polyethylene, Shrink Ratio: 3:1. Resistant to salt water, Gasoline, Diesel Fuel, Oil, and more. Diameter: 3/4". The battery Cable lugs meet S. A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V.
Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Color: black, material: Polyethylene, Shrink Ratio: 3:1. 1 year warranty. Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more.
TEMCo 1/4" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft RED
Diameter: 1/4". Resistant to salt water, Diesel Fuel, Oil, Gasoline, and more. Diameter: 3/4". Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1/2". 1 year warranty. 1 year warranty. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.
Ul tested & Approved. Upon cooling, non-drying, the adhesive solidifies, forming a permanent, flexible and water resistant barrier. Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.
1 year warranty.
SELTERM 10 Pack 4 Gauge 4 AWG 5/16 Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug
1 year warranty. Close end pad seals Out Moisture Keeping Cables Dry. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product.
Color: red, material: Polyethylene, Shrink Ratio: 3:1. 1 year warranty. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Diameter: 1/2". Color: black, material: Polyethylene, Shrink Ratio: 3:1.
Color: red, material: Polyethylene, Shrink Ratio: 3:1.
TEMCo 1" Marine Heat Shrink Tube 3:1 Adhesive Glue Lined 4 ft BLACK
Made from 100% annealed Tinned Copper for Max Current Flow. Upon cooling, non-drying, the adhesive solidifies, forming a permanent, flexible and water resistant barrier. Can be Crimped or Soldered. Corrosion free Ideal for Marine Automotive or Outdoor Use. Color: red, material: Polyethylene, Shrink Ratio: 3:1.
Ul tested & Approved. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Ul tested & Approved. Adhesive adheres to: most plastics, metals, rubber, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts.
1 year warranty. Color: red, material: Polyethylene, Shrink Ratio: 3:1.
Temco 10 Lot 2 AWG 3/8 Hole Ring Terminal Lug Tinned Copper Uninsulated Gauge
Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Resistant to salt water, Gasoline, Oil, Diesel Fuel, and more. Diameter: 1". Lifetime warranty. Can be Crimped or Soldered. 1 year warranty. 1 year warranty. Resistant to salt water, Oil, Gasoline, Diesel Fuel, and more. Diameter: 3/8". Closed end construction.
Adhesive adheres to: most plastics, rubber, metals, Continuous Operating Temp: -45C up to +145C. Longitudinal shrinkage lengthwise: Less than 8%, Insulating Voltage Capability: 600 volts. Most orders received in 2 to 5 days. Diameter: 1".